PT. TUNASINTI BHAKTIMAKMUR

BENTONITE MANUFACTURER

OUR PRODUCT

Description: Drilling Mud A-3 is treated bentonite which meets the standard of American Petroleum Institute (API) Spec. 13A, section 4, Feb 2010
 
Uses:
  • Helps to seal off porous spaces in the earth’s formation
  • Strengthens the earth’s formation to prevent erosion
  • Builds a mud cake
 
Advantages:
  • Helps to remove drilling/cutting result
  • Can be readily added to fresh water (freshwater drilling fluid)
  • Easily mixed
  • Has a competitive price
 
Packaging:
  • Drilling Mud A-3 comes in paper bags with plastic intermediate layer and has a weight of 45.5 kg (100 pounds)
 
Typical Properties:
  • Moisture (%) max —————————————— 13
  • Suspension properties
Visc. at 600 rpm min ———————– 30 
YP / PV ratio max ———————– 3 
Filtrate volume (ml) max ——————– 15 
 
  • Residue greater than 75μm (% wt)  max ———— 4
Description: Ultra Bent A is treated bentonite which is used in foundries as the bonding media for iron foundry facing sands.
 
Advantages:
  • Provides of high quality compressive strength
  • Facilitates easy “shake out” process
  • Enhances the surface quality of the product
  • Has a competitive price
Procedure: 0.3% – 1% bentonite Ultra Bent A is to be mixed with old/used
 
for use:   sand    
 
Packaging:
Ultra Bent A comes in woven bags with plastic intermediate layer and has a weight of 45.5 kg (100 pounds)
 
Typical
Properties:
  • Swelling index (mls/2 g) : > 22
  • Gelling Time (minutes): < 6
  • Monmorillonite (%): > 65
  • Moisture content (% max):    13
Description: Kelapa Hibrida is used in refineries to bleach CPO (crude palm oil) and CCO (crude coconut oil)
 
Advantages:
  • Has a high-grade bleaching power
  • Has a low-grade Spend oil on earth
  • Stabilizes quality of the product
  • Has a competitive price
 
Procedure 2.5% of Bleaching Earth Kelapa Hibrida is required for the 
for use:     refining of CPO/ CCO
 
 
Packaging: Bleaching earth Kelapa Hibrida comes in woven bags with plastic intermediate layer and has a weight of 25 kg 
 
Typical Properties:
  • PH (10% suspension)  min ————————— 4-6
  • Acidity, mg KOH/g (%) max. —————— 0.35
  • Oil Retention  (max.)  —————————— 30
  • Moisture content (2h, 110c)% max————– 13
  • Bulk Density (gr./ ml) max.—————- 0.65
 
Decolorizing test
CPO quality: FFA: 4.72, DOBI : 2.026, R : 11.4, Y : 50
BE dosage: 2.5%, agitate: 1 hour, heat up: 110C
Decolorizing: R: 2.1 , Y : 21

go back to homepage

Head Office

Jalan Sumbermas Timur No. 9, Semarang 50178, Central Java- Indonesia.
Telp : +62 24 3547457
Fax : +62 24 3550971

Factory

Jalan Raya Magelang- Purworejo Km.11, Dusun Sidomukti 1, desa Sidoagung, Kecamatan Tempuran, Kabupaten Magelang 56161, Central Java- Indonesia
Telp: +62 293 335262

CONTACT US
Whatsapp Me